Configuring AV Scan Override(s)

Third Wall allows you to override the AV integrated with Automate or, if one is not integrated, specify one.

In Control Center, click on System at the bottom left and navigate to Configuration \ Dashboard.

Then click the Config tab, then the Integration tab, then the Third Wall tab.

At the bottom left of this screen, click AV Scan Override.

Fill in the fields as required, this example shows how to set up Microsoft Windows Defender. Be sure to test your command to confirm it works as expected. Then click Save.

You will now have an available override.

To assign to a policy, double click on an Automate location then click the Third Wall tab. You will find all configured AV Scan Overrides at the bottom left of the Security Overview screen. Select the AV Scan Override you wish to use for this location.

When the Detection Action “AV Scan” is selected, upon detection it will run an AV Scan from the configured override.

You will be able to open any logs generated by the AV SCan to view the results of the scan.